Customer Service
800.575.9618


CLA-VAL

Cla Val Model: RD7L / RP6L / RP7L / RP8L / RP8N / RP8V

In 1995 Cla-Val entered into a private labeling agreement with Febco.  Below is a cross reference guide under the Parts Breakdown tab.  Find the Febco equivalent model number for repair parts. From 1995-1997 the Cla-Val models came with a blue epoxy coating.

Cla Val Model: DC6L / DC7L / DC8L / DC8N / DC8V / DD7L /DD8L / DD8N / DD8V

In 1995 Cla-Val entered into a private labeling agreement with Febco.  Below is a cross reference guide under the Parts Breakdown tab.  Find the Febco equivalent model number for repair parts. From 1995-1997 the Cla-Val models came with a blue epoxy coating.  

Cla Val Model RP-4V

The Cla-Val RP-4V is a reduced pressure assembly ( RPA ).  It was available in 4” – 8” sizes and was produced from 1990-2005.  The  body was made of  cast iron body with a fused epoxy coating.

Cla Val Model RP-4

The Cla-Val RP-4 is a reduced pressure assembly ( RPA ).  It was available in 2” – 10” sizes and was produced from 1991-2005.  The 2” body was made of bronze while the 2 ½” – 10” sizes utilized a cast iron body with a fused epoxy coating.    

Cla Val Model RP-2

The Cla-Val RP-2 is a reduced pressure assembly ( RPA ).  It was available in ¾” – 1 ½” sizes and was produced from 1978-2003.  The body was made of bronze.    

Cla Val Model RP1-EX RP

The Cla-Val RP1/RP-1EX is a reduced pressure assembly ( RPA ).  It was available in 2” – 10” sizes and was produced from 1978-1990.  The 2” body was made of bronze while the 2 ½” – 10” sizes utilized a cast iron body with a fused epoxy coating.  

Cla Val Model RP-1

The Cla-Val RP1/RP-1EX is a reduced pressure assembly ( RPA ).  It was available in 2” – 10” sizes and was produced from 1978-1990.  The 2” body was made of bronze while the 2 ½” – 10” sizes utilized a cast iron body with a fused epoxy coating.  

Cla Val Model D-4 DC

The Cla-Val D-4 is a double check valve assembly ( DCA ).  It was available in 2” – 10” sizes and was produced from 1991-2005.  The 2” body was made of bronze while the 2 ½” – 10” sizes utilized a cast iron body with a fused epoxy coating.  

Cla Val Model D-2 DC

The Cla-Val D-2 is a double check valve assembly ( DCA ).  It was available in ¾” – 1 ½” sizes and was produced from 1978-2003.  The body was made of bronze.  

Cla Val Model D/D-EX DC

The Cla-Val D/D-EX is a double check valve assembly ( DCA ).  It was available in 2”-10” sizes and was produced from 1958-1990.  The 2” body was made of bronze while the 2 ½” – 10” sizes utilized a cast iron body with a fused epoxy coating.  

Page 1 of 212